View Full Version : Armors

08-22-2002, 11:42 PM
As i did said in my other thread im planing of Doing Lenneth Valkyrie Armor. I want to know on how i can make the Armor of Lenneth ^-^ (And yes i admit it,im a guy who wanna crosplay as Lenneth :D :D :D :D ) Any tips will do.

L to the 3rd
08-24-2002, 03:19 AM
hmm well I ghettoed stuff for my armor..
like home-depot and toys r us are the best
places to look for stuff. I dont' recommend
using paper mache.. unless you are an expert
w/ it.

08-24-2002, 12:31 PM
Thanks Chrissy ^_^ BTW,i didnt know that you post here ^_^

08-25-2002, 02:38 PM
Check out the fiberglassing thread. :-)

08-27-2002, 11:37 PM
if you try the ghetto-fabulous route, (i.e cardboard n duct tape)
I highly suggest you cover any duct tape with a layer of masking tape, because paint does NOT adhere to duct tape, and will flake off easily.
Duct tape does come in a variety of colours such as red, black, white, blue and grey.. i belive there are a few more.. you could check out http://www.identi-tape.com/
Gaffers tape may be a bit expensive (about $15 a roll) but it is a DREAM to work with. its as strong durable as duct tape, and lets you paint over it without flaking off, as far as I know. It doesnt have the strength of duct tape, but looks TEN TIMES SMOOTHER.

L to the 3rd
08-28-2002, 03:19 AM
hmm i learned someting new about tape! lol ^_^

08-28-2002, 02:04 PM
heh i made my very first cosplays from cardboard n duct tape... my family called me the duct tape king.. but thats another story...Kusangi is right though... you may want to check out the fibreglassing thread.. www.Bioweapons.com has extensive tips (REALLY COOL GUYVER SUIT)

Ive recently embarked on that fibreglassing journey myself, with some shortcuts in between.

Priority mail envelopes are your friend! They're free(always good) and unlimited (sort of). If possible Id construct basic pieces from them and then covering the cardboard in Gaffers tape (or duct then another layer of masking, if Gaffers tape is out of your wallets reach)

Then put about 6 to 8 coats of Gesso, alternating directions with each coat. In other words on the first coat use vertical brush strokes, and on the second use horizontal ones...

Then in THEORY fibreglass right ontop of your cardboard wonder, Im not sure how many layes one or 2 should do it. Then a couple layers of Bondo (body filler) if you need to carve/ingrave details.

Finally WETsand your piece(make sure everything is COMPLETELY dry and then wet the surface to minimize fibreglass dust), and prime before painting!