PDA

View Full Version : Bo-Shurikens tutorial


haiden-sama
03-01-2008, 10:08 PM
Hey everyone!
Today, I'll show you how to make somes Bo-Shurikens.

Fisrt, you will need :
-6 inch 1/2 needles
-Duc-tape
-Sand paper
-Something like cement to sharpen.
Ther is a picture, but without the ciment:

www.i213.photobucket.com/albums/cc227/tcho28/000_0013-1.jpg


STEP 1: Take a needle and sharpen it on the ciment.Then, your needle should be a little more sharper

STEP 2: Take the sand paper; and ''sand paper it''^^,.Ther, it should look like this
Before:www.i213.photobucket.com/albums/cc227/tcho28/000_0018.jpg
After:www.i213.photobucket.com/albums/cc227/tcho28/000_0020.jpg

STEP 3: Roll Duc-tape on it. You can either use something like rope or anything you'd like to try ^^, .
www.i213.photobucket.com/albums/cc227/tcho28/000_0015.jpg

Step 4:Have fun thowing your needles on wood or something!(It can penetrate almost anything).And I am not responsable of anything you do with it by the way.

featherweight
03-01-2008, 11:21 PM
ok this is a cosplay props board not a how to make deadly things section

RosyPosy
03-02-2008, 01:12 PM
Oh my... I agree with featherweight. Although I will admit its pretty cool, I severely doubt any convention would let you bring that in.

haiden-sama
03-02-2008, 05:07 PM
^^ Sorry guys... But it's very cool to use, so I wanted to show you how to make them.

Okami Yokai
03-03-2008, 08:53 AM
Agreed with Featherweight.

Sintakz
03-03-2008, 03:07 PM
What you can do is use the cement to dull the tip so that it isn't pointy after you get it to the ideal shape.