PDA

View Full Version : Killzone Helghast Goggle


bsan89
05-11-2010, 08:56 PM
Hey guys I'm about 80% done with my updated costume
for Killzone. Here's the guy I'm cosplaying. I need help on the goggle.

Hellghast Grenadier (http://2.bp.blogspot.com/_rc_nnuMe3M8/S1B0QXWSyYI/AAAAAAAAFNE/YK8kNcJxves/s400/helghast+grenadier.jpg)

I got the idea from this:
http://the-mirror-melts.deviantart.com/art/Splinter-Cell-night-goggles-127109858

Here's what I have:
1.) Home Depo "SAFETY GOGGLE"
2.) (I forgot the exact measurement) 1/2 PVC tube.
3.) x4 red 5mm light
4.) double AA battery.

What I need:
-I need a "RED" plastic soda bottle.
I have no idea where I can find one. Red soda bottle are usually clear bottle
fill with red soda.

What I done:
-First I hot glue all x4 pvc tube to the safety goggle.
-spray paint the entire model black
-cut holes behind glue pvc tube.
-put in 5mm light
-tape double a battery to side of safety goggle.

It look great so far, I just need to cover the front of the tube like in the pix.
She said she use plastic bottle and cut circle out of it.
The problem is I CANT FIND ANY RED PLASTIC Bottle to cut.
I found green and it look great if I were cosplaying Splinter Cell.

Bluce Ree
05-12-2010, 02:52 PM
If it's just an effect for photos and you don't need to see through them either, you could use red reflective tape which will glow when a photo is taken using the flash.

Here's an example using green tape on Yoshimitsu's sword...
http://www.cosplay.com/photo/1317552/

Imperator
06-11-2010, 01:36 PM
Got any update pics to share? The Grenadier/commando has the sickest goggles ;]