PDA

View Full Version : GLa-DoS cosplay


Noir Tsukiyomo3
02-27-2012, 04:25 PM
Hiya cosplayers!

I've been needing a tiny bit of help when making my GLaDoS cosplay, more specifically, the cores. It's based off of the first Portal, and I have a design too, so I'll post it.

GLaDoS Design (http://e621.net/data/d2/8b/d28b35213f48542d264e975cac52713b.jpg?1239624265)

I need help with the cores, I already have the shape, and paper māche-d it, and I'm just not sure where to go from there. I was planning on using plaster, and then coating it in a coat of resin or some sort of process like that. But is there anything else I could do that might help me accomplish this cosplay?

Zhor'Fughakee
03-01-2012, 07:49 PM
You could use some foam sheet since the cores have some 3D in, foam is easy to work and make a beautiful finish :) you wouldn't need to put some primer or something else to smooth all the stuff,

That's what I would do but I was a different GLaDOS model so I didn't need to make the Whole process... anyways xD

Hope it helped ! :)