Tsugumi Takakura

Super Robot Wars

Last Updated: 03-28-2012

Apparently Iím easily persuaded into groups sometimes! I know next to nothing about Super Robot Wars or Tsugumi specifically, but am always happy to make a costume design I like and have fun participating in a group. Her costume reminds me a little of Rebecca from Wild Arms (itís the pink and lilac) which was incidentally another group I was persuaded into, and yellow being my favourite colour was probably a decisive factor in choosing the costume.

When choosing fabrics, I started on the basis that the lilac had to be stretchy for making the socks and the pink should probably also be stretchy to help with the bootcovers. Although her pink shorts seem like a looser fit, there would be no major problems using stretch fabric for the other pink and lilac parts of the costume. I initially wanted a cotton jersey for a nice matte look, but all the shades I could find were too pale and it wasnít quite stretchy enough to be ideal for the bootcovers and bodysuit. I ended up getting lyrca in the January sales and itís just about matte enough for my tastes. I think the pink is a little too bright, but it was worthwhile since the stretchiness simplified the bootcovers and bodysuit for me!

For the jacket, Iíd have liked a decent weight fabric, but yellow is so awkward to find and after dyeing fabric for Selphie and Adora recently, I was fed up of yellow dye. I settled on pale yellow polycotton which was cheap and avoided all dye experiments. To prevent it being see-through and to add some weight, I used an interlining of white polycotton (two layers in fact; one layer began life as my mockup). 4 layers of polycotton might sound ridiculous, but it worked out fine and was still cheaper than buying half as much cotton drill in any of my local fabric shops (and on top of that I would have had to buy yellow dye for the white drill too).

I used Simplicity 2508 as my starting point since itís the only longer coat pattern I own. I made a mock-up in spare white polycotton. Iíd previously adapted the pattern to remove the raglan sleeves for my Calisto costume, so I went with that again. I included a centre front panel on my mock-up for fitting purposes, but the final coat doesnít have this Ė I patterned out the waist section and collar separately. The top of the mock-up came out perfectly with some tweaks, the lower part not so much. Iíd hoped that just flaring out the panels of the coat would add the volume I wanted, but it wasnít quite working out. Instead, I used an almost-half-circle shape to form the bottom of the coat.

The final coat is fully lined (which helped with the curved hem!) I just used polycotton for all the lining since the coat would only be on top of lycra/my bare arms so there wasnít any need for a more slippery lining fabric anywhere. The bow at the back is made from long lined, rectangular, interfaced strips of the yellow fabric and I made the orange bows on the costume the same way. The centre front lace-up waist section took a while to shape and position correctly Ė I made sure that the pieces overlap a little avoid a gap in the middle. Itís also all lined and interfaced and the lacing is the actual closure for the coat. I used the same lace trim as on my Rebecca costume since itís a close enough match to the zigzag trim. I patterned out the collar with a lot of trial and error. I ended up padding it out with wadding to get the puffy sort of effect. Thereís a large snap behind the bow which acts as the fastening. The cuffs are interfaced lycra, and I used tiny cover buttons to make matching yellow buttons for them.

The coat was what really took up most of my time. After that it was plain sailing, especially since lycra makes fitting and patterning things much simpler! I used my Kwik Sew 3273 bodysuit pattern, which includes a halterneck version and just cut the legs shorter. I didnít see any point in thinking about the areas which will be covered by the coat so I left the pattern as it is with the low back and no sleeves. I just had to add a centre front seam and the cutout in the middle, a bit of interfacing to help the collar and that was it. I was very lazy with sewing the bodysuit (because it would hardly show under the coat and also due to being short on time) and didnít apply elastic to the edges or spend all that much time on it at all - just overlocked it together and that was about it!

The socks are simple lycra tubes, with a little stirrup to go under the foot (because I thought they might get all bunched up when I pulled the boots on over them). I put elastic in the tops to help keep them up.

The bootcovers were also easy Ė I used a pair of cowboy boots which were about the right length and cut them a little shorter as well as cutting in a lower v-shape at the front. I pinned the pink lycra around them with a seam at the centre front and back and along the sole, and sewed it up. Since the costume was for Minami which is held in a hotel, I knew I wouldnít be walking much outside, or even walking about much at all, so I didnít bother doing anything to make more resilient soles for the covers Ė might stick on soles later. To keep them up, I hot glued and duct taped the tops in place on the inside of the boots.

Iíve had problems finding nice curly wigs before, but this time round the search was easier since Tsugumi has a fringe, so I could consider all wigs - with a fringe, or without (since I can cut one in easily). I looked at a few on ebay, but was keen to ensure I had as thick a wig as possible. I was thinking about trying New Lookís Showgirl wig knowing it would be a good betÖbut what caught my eye was Cosplay.comís new wig range. I debated it for a while and decided to give their long Holly wig a shot, partially as an excuse to find out what new wigs were like. Itís wonderful quality and absolutely beautiful! Styling it was frustrating due to the length of the fibres, but I eventually wrestled it into braids either side. I added in some extensions I already had to pad out the braids a bit. Itís clipped into a ponytail to try to keep the hair all quite spread out, rather than tightly tied back. The bow slots on to the clip. I curled the fringe under and trimmed it and the short, loose pieces at the front a little, hairsprayed everything and that was it done!

Since I already had green contacts I wore them with the costume, but itís good to know my glasses would be suitable for the character too. My contacts are Freshlook Colorblends in gemstone green.

Comments: 0

Please log in or register to view comments.


United Kingdom


Character Tsugumi Takakura
Series Super Robot Wars
Costume Views 1059
Favorites 0
Comments 0
Upload Date 03-28-2012
Debuted MinamiCon 2012

Copyright 2002-2018 Cosplay.com, LLC. All Rights Reserved.
All comments and posts in our forums are the opinion of the respective poster.