Yuna (Thief)

Final Fantasy X-2

Last Updated: 12-17-2009


Costume worn at Ushicon 4 (2005) - Saturday
Costume completed - July 22, 2004
Version 2 completed - January 5, 2005

The release of Final Fantasy X-2 brought forth many new costume designs for Yuna. What made me want to do this costume the most was the colors. If the main color was anything other than a fading blue, then I wouldn't have had much interest in it.

Wig/Accessories - I used the same wig and earrings that I used for Summoner Yuna. I style Yuna's wig from FFX to match more of FFX-2. The twin blades were commissioned from Amethyst Angel.

Tail - I got some foam and cut 5-6 inches in width, rolled it up and supported it to stay rolled up by using hair ties. I cut three long pieces of red material and braided it and hand sewed it around the foam making sure I covered it all up. I bought some loose synthetic hair to match the wig, and machine sewed to a loose end of red material to make sure it stays. That part is covered with the white at the end of the tail, which was dyed a fuchsia color. A blue cord was used to tie at the middle of the top half.

Top - The top was build with a backless and strapless bra as the base that I covered with red stretchy material. Once I figured out the pattern for the top and how I was going to fold the fabric over, I cut and dyed the fabric the same as the other parts. Figuring out how to do the top was the hardest part of making this costume for me.

Arm-warmers - I used a stretchy white material for this. A pain and joy about the armwarmers was the little pieces that covered each arm that I had to individually dye. For my second version I sewed the top of each arm warmer to each strap on my shoulder

Gloves - These were found in a thrift store.

Skirt - The pattern for this wasn't as hard to figure out than the top. Once the pieces were cut and seamed, they were dyed. I poked little holes in the fabric on the front two sides and strung a black cord through.

Socks/Ankles - I used the same stretchy red material for the top for the socks and fitted it to my legs with a sort of angle to the top. The white fabric over the ankles seemed like it had a faint reddish pink tint in it. After figuring out the pattern, I used a a very diluted red dye on them.

Shoes - I went a pair of shoes for each version of this costume I did. Each was found at a thrift store. The shoes were altered to look like Yuna's thief shoes as much as I could get it too.

Total spent - $176.34

Comments: 1


Please log in or register to view comments.

Angelwing

United States



Stats

Character Yuna (Thief)
Series Final Fantasy X-2
Costume Views 3448
Favorites 11
Comments 1
Upload Date 06-18-2004

Copyright 2002-2013 Cosplay.com, LLC. All Rights Reserved.
All comments and posts in our forums are the opinion of the respective poster.