Socom stage 4. Suppressor is made of thick walled pvc, with a washer glued into the front end and a carriage bolt in the back end, centered using cardboard spacers. A matching machine nut is in the barrel of the pistol itself, so that the suppressor can screw on/off as needed. Need to hollow out the module below the barrel/in front of the trigger, to house an LED set up. Total weight with suppressor thus far is about 1lb. so it's pretty hefty for a prop gun made of foamcore, masking tape, and hot glue.
Copyright 2002-2013 Cosplay.com, LLC. All Rights Reserved.
All comments and posts in our forums are the opinion of the respective poster.