Go Back   Cosplay.com > Cosplay Chat > Marketplace > Archived Marketplace Forums > Commissions Wanted

 
Thread Tools Rate Thread
Unread 07-01-2012, 08:32 PM   #1
Huntsman444
Registered User
 
Join Date: Aug 2011
Posts: 0
Dishonored - Corvo Equipment Commission Wanted

Hey there. I'm looking to have a couple of Corvo Atano's things made from the upcoming release Dishonored. I need his blade done, as well as his mask. Both willbe a fair challenge to make. The mask is very intricate, and I need the blade to function in a manner that it does in the game. Attached are some pictures of both pieces, and a youtube clip that briefly shows the way the sword works. Brief as it is, I am sure it will be easy to imagine how it is to work when you look at the picture as well. If you can do either, I eagerly look forward to getting in touch with you about them. Thanks for your time.

Mask pictures:
http://www.dishonoredcentral.com/wp-...k02-iphone.jpg
http://cdn.shazoo.ru/assets/media/ga...nored-mask.jpg
http://www.dishonoredcentral.com/wp-...ed-467x270.jpg
http://i.imgur.com/cifzNl.jpg
http://i.imgur.com/HQql2l.jpg
http://www.sidequesting.com/wp-conte...016.jpg?9d7bd4
http://www.geekworldradio.com/pics/i..._CorvoMask.jpg

Blade pictures & video:
http://images3.wikia.nocookie.net/__...ord_design.jpg
http://gamerfront.net/wp-content/upl...Dishonored.jpg
Enjoy the whole trailer(Like I did) to see the knife up close for extra details, or skip straight to about 2:17 to see the blade being equipped. Imagine a big switchblade.

Thanks for giving it a look folks. It's a a tall order, but I know someone out there can do it, all of you make some amazing stuff
Please contact me via this site or devoncicco@gmail.com if you have anything for me, and we can discuss pricing/material/etc. from there. Thanks again

ATTENTION: My mask situation has been taken care of, so I apologize if anyone was willing to make that. I am, however, still on the market for the knife, so please, send me any information you can. Thank you

Last edited by Huntsman444 : 07-02-2012 at 03:22 PM.
Huntsman444 is offline  
 
Unread 07-01-2012, 11:37 PM   #2
Millions_Knives
Registered User
 
Millions_Knives's Avatar
 
Join Date: Apr 2007
Posts: 826
hmm this is a rare bit of fun for an engineer ~smiles~

ever sen a mecha go from this to this

my photobucket
my youtube ware i share all that i do with the cosplay community

i can do them
but the telescoping on the knife wont be as clean as in the pic
(sry we no have game physics)
the blade would be plastic and unusable in combat via many con rules (would brake if used)

also im not cheap
2 weeks labor($200 sry it takes a while to make/find all the parts)
+material costs(ill itemize)
+mechanics($50 functional parts take more work to get right)
+shipping(need city and zip code)
=just a ball park but you could be looking at $325 from me after shipping

videos of your props would be made to help other cosplayers

i work on a time slot system
so i would need to know when ya want it and see if i can do them in time
(first open slot 9/10/2012)
and ask $50 of the total to hold the time slot
half of the remainder is due when i start
and the rest when you get pics of it

im not the cheapest for sure
but hope to hear back on this one for sure
ty
good times to all
__________________
If You liked my advice
Please subscribe to my Youtube channel
with hundreds of videos
it is the largest collection of cosplay tutorials and cosplay fun on youtube.
Millions_Knives is offline  
Unread 12-07-2012, 01:37 AM   #3
CptJackRabbit
Registered User
 
Join Date: Sep 2009
Posts: 3
I do not log in here much, but I was looking for the same stuff, and found this thread. Are you still able to make these? Specifically, I care more about the mask.
CptJackRabbit is offline  
Unread 12-07-2012, 01:44 AM   #4
CptJackRabbit
Registered User
 
Join Date: Sep 2009
Posts: 3
Quote:
Originally Posted by Huntsman444 View Post
Hey there. I'm looking to have a couple of Corvo Atano's things made from the upcoming release Dishonored. I need his blade done, as well as his mask. Both willbe a fair challenge to make. The mask is very intricate, and I need the blade to function in a manner that it does in the game. Attached are some pictures of both pieces, and a youtube clip that briefly shows the way the sword works. Brief as it is, I am sure it will be easy to imagine how it is to work when you look at the picture as well. If you can do either, I eagerly look forward to getting in touch with you about them. Thanks for your time.

Mask pictures:
http://www.dishonoredcentral.com/wp-...k02-iphone.jpg
http://cdn.shazoo.ru/assets/media/ga...nored-mask.jpg
http://www.dishonoredcentral.com/wp-...ed-467x270.jpg
http://i.imgur.com/cifzNl.jpg
http://i.imgur.com/HQql2l.jpg
http://www.sidequesting.com/wp-conte...016.jpg?9d7bd4
http://www.geekworldradio.com/pics/i..._CorvoMask.jpg

Blade pictures & video:
http://images3.wikia.nocookie.net/__...ord_design.jpg
http://gamerfront.net/wp-content/upl...Dishonored.jpg
Enjoy the whole trailer(Like I did) to see the knife up close for extra details, or skip straight to about 2:17 to see the blade being equipped. Imagine a big switchblade.

Thanks for giving it a look folks. It's a a tall order, but I know someone out there can do it, all of you make some amazing stuff
Please contact me via this site or devoncicco@gmail.com if you have anything for me, and we can discuss pricing/material/etc. from there. Thanks again

ATTENTION: My mask situation has been taken care of, so I apologize if anyone was willing to make that. I am, however, still on the market for the knife, so please, send me any information you can. Thank you
Who took care of your mask situation, and how well does it look, and does the front come off?
CptJackRabbit is offline  
Unread 12-07-2012, 04:37 AM   #5
Millions_Knives
Registered User
 
Millions_Knives's Avatar
 
Join Date: Apr 2007
Posts: 826
well the who wanted it in the end flaked out about last min
so its still up for grabs

heres the quote

"as some of you know i make youtube vids of all my work
and to have new videos i only make a project once
so to be fair ill let you all have at it at once

this is the current quote foe the mask

*********

itemized costs:
PVC sheeting=$6
wonderflex=$11
red cotton cloth=scrap/free
metal tube=$7
metal wire=$3
lenses,pins,clockwork,ext.=$15 (lucky there is a store near me that sells steampunk gear)
paint,glue, screws,ext.=$10
1 weeks labor=$100
total=$151+shipping (need zip and city to calculate) "


ill have to slot you for a week in Jan at the earliest to make it
i ask $50 to hold a slot
$50 when i start
and $51+shipping when you see it done
hope that sound fair

TY
good times to all
__________________
If You liked my advice
Please subscribe to my Youtube channel
with hundreds of videos
it is the largest collection of cosplay tutorials and cosplay fun on youtube.
Millions_Knives is offline  
Unread 12-07-2012, 10:23 AM   #6
CptJackRabbit
Registered User
 
Join Date: Sep 2009
Posts: 3
Quote:
Originally Posted by Millions_Knives View Post
well the who wanted it in the end flaked out about last min
so its still up for grabs

heres the quote

"as some of you know i make youtube vids of all my work
and to have new videos i only make a project once
so to be fair ill let you all have at it at once

this is the current quote foe the mask

*********

itemized costs:
PVC sheeting=$6
wonderflex=$11
red cotton cloth=scrap/free
metal tube=$7
metal wire=$3
lenses,pins,clockwork,ext.=$15 (lucky there is a store near me that sells steampunk gear)
paint,glue, screws,ext.=$10
1 weeks labor=$100
total=$151+shipping (need zip and city to calculate) "


ill have to slot you for a week in Jan at the earliest to make it
i ask $50 to hold a slot
$50 when i start
and $51+shipping when you see it done
hope that sound fair

TY
good times to all
Does the front piece detach? And should be fair.. Just have to be about a week before I can send the first bit. By week I simply mean after the weekend.

Last edited by CptJackRabbit : 12-07-2012 at 01:24 PM.
CptJackRabbit is offline  
 


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 03:52 AM.


Copyright 2002-2013 Cosplay.com, LLC. All Rights Reserved.
All comments and posts in our forums are the opinion of the respective poster.