Go Back   Cosplay.com > Reviews > Construction Equipment Review

Reply
Thread Tools Rating: Thread Rating: 6 votes, 5.00 average.
Unread 09-27-2011, 11:56 AM   #1
POP*NOVA
POP'N
 
POP*NOVA's Avatar
 
Join Date: Sep 2011
Posts: 2
Sewing machine suited for sewing lycra fabric

I've never been good at navigating forums like these, so please forgive me if this has been misposted - that wasn't my intention.

I'm going to be making my first real costume from scratch this year for Oni-Con, and I have the entire thing planned out, but I've never very seriously used a sewing machine before. I mean, I've fiddled with the settings on some felt once, and it worked fine... but durring my testing with various fabrics, I've found that elasticy materials jam up very easily on the Singer machine that I had.
The costume I'm making is ALL swimsuit-like material and covers nearly the entire body. I've had my eye on the Rayon Lyrca fabric at SpandexWorld.com, ordered a few swatches and it's EXACTLY what I need, but I don't want to waste it by having it clog up in the machine.

LONG STORY SHORT: what sewing machine, if any, is best for sewing thin stretchy fabrics, like lycra, without much difficulty for someone as new to this as I am?
POP*NOVA is offline   Reply With Quote
 
Unread 10-02-2011, 06:44 PM   #2
lunaladyoflight
Glitter Addict
 
lunaladyoflight's Avatar
 
Join Date: Aug 2006
Posts: 1,954
An overlock serger is the best but they're a pain in the butt to thread and for a newbie I wouldn't recommend one.. Some non-serger machines can do a faux serge stitch. My machine is actually pretty good with a lot of different fabrics, I have a Husqvarna Scandinavia 300. Not a cheap machine, but not super expensive either.

Basically I don't believe you should be learning with a lycra project. Lycra is tricky and while it is forgiving with patterning problems, it's not the easiest fabric to work with. I've made a bunch of dance costumes over the years and this is experience talking.

Last edited by lunaladyoflight : 10-02-2011 at 06:46 PM.
lunaladyoflight is offline   Reply With Quote
Unread 10-07-2011, 07:19 PM   #3
Limeyaku
First-Mate
 
Limeyaku's Avatar
 
Join Date: Nov 2002
Posts: 1,518
i have a serger, but use a regular machine with a zigzag stitch instead, cause im lazy. works just fine.
Limeyaku is offline   Reply With Quote
Unread 10-16-2011, 04:32 PM   #4
crying_koneko
Registered User
 
crying_koneko's Avatar
 
Join Date: Nov 2004
Posts: 69
Also try a ballpointed sewing needle for your machine they're duller and will move the fibers aside, not rip through them.
__________________
*"COSPLAY PERSON" OF IMPROV ANIME!*---> http://improvanime.webs.com/
crying_koneko is offline   Reply With Quote
Unread 11-07-2011, 01:15 PM   #5
Evil Bishounen
Hail to the King
 
Evil Bishounen's Avatar
 
Join Date: Jul 2003
Posts: 1,484
Quote:
Originally Posted by crying_koneko View Post
Also try a ballpointed sewing needle for your machine they're duller and will move the fibers aside, not rip through them.
No, you actually don't want to use a ballpoint needle on lycra. Ballpoint needles are meant for knits that don't contain high amounts of elastic.

To sew with lycra properly, you must use a special kind of needle called a stretch needle. A stretch needle is meant for high-resistance/high-elastic knits. It has a deeper gouge in the back so that the machine hook can properly lock your top and bobbin threads together. If you use any other kind of needle, you will get tons of skipped stitches and you may also end up with thread knots in the feed dogs or bobbin area.

You also need a machine with a zigzag stitch or a mock-serge stitch. The width of your stitch is proportional to how much stretch you need, because as you stretch the fabric the stitch will become straight. So, a width setting of 1mm will have very little stretch, and in a high-tension area your thread will break.
__________________
FF9 cosplay? Hit me up!

I now have a Tumblr. Sometimes I use it.
Evil Bishounen is offline   Reply With Quote
Unread 06-10-2016, 08:05 PM   #6
hotrod808
Registered User
 
Join Date: Jun 2016
Posts: 1
Post custom swimwear? omg, so much to learn

looking to make some. Been wanting to make my own for a while now. For starters I pickup up a Coverstich Serger Brother 2340CV, will do the job for now, I have not really used it yet, I tried to sew a bikini bottom and it started sewing a ball as if it were stuck, I used a Maxilock brand (think that's the brand) Wolly Nylon in black. I am new to sewing.
Since that kept happening, I held off to educate myself a bit more. I am not giving up because it's not rocket science and I am determined to make my own swimwear regardless of why others says about it being a pain to work with, I've dreamt of this since I jumped into my first one piece swimsuit aka:leotard - lol that became my fav swimsuit (yes, it was a mix of cotton - weren't as thick as you think) and wore it till it fell apart, since then I was determined to make the exact one (20 yrs ago, Im 37 now .
So basically teaching myself, with youtube videos on the basics and hitting the library hard on everything spandex.
Just trying to find more sites focused on just swimwear, lots of costume blogs that utilizes Spandex/Elastane. Hoping to share more with other w/ same interest.

For those of you talking about stitches please include pics along with the nicknames so I don't get confused, if it's not too much trouble, I would really appreciate it (i'm a visual learner).
As I mentioned, I am still new and learning the lingo.

Any feedback would be sooo great,thank you for taking the time to help me.

cheers
hotrod808 is offline   Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 06:29 PM.


Copyright 2002-2016 Cosplay.com, LLC. All Rights Reserved.
All comments and posts in our forums are the opinion of the respective poster.