Go Back   Cosplay.com > Cosplay Construction > General Construction Help

Reply
Thread Tools Rate Thread
Unread 06-08-2013, 12:46 AM   #1
FadedxLight
Keyblade Wielder
 
FadedxLight's Avatar
 
Join Date: Dec 2012
Posts: 15
How to Make Shoe and Shoulder Plate

I couldn't really think of a better title for this x_x sorry~

But can anybody help me with these?

http://xbox360.tgbus.com/UploadFiles...4095241122.jpg

It's on her shoes and attached to her cape.

What should I use to make them? How should I attach them?

If you help it would mean so much to me! ^_^
FadedxLight is offline   Reply With Quote
 
Unread 06-08-2013, 01:05 AM   #2
Fabulousity
Only a little bit crazy
 
Fabulousity's Avatar
 
Join Date: Jun 2009
Posts: 2,882
I would sketch put the design on a piece if paper, and then place a piece of wax paper of top and then trace your design with hit glue. I've seen people use hot glue to make similar pieces, so I think I would work! You could get black hot glue, or just use the regular kind and then paint it.
__________________
Mami Tomoe (Puella Magi Madoka Magica) - 40% complete
Queen Elsa (Frozen) - 0%
------------------
Gryffindor and proud!!!
------------------
Fabulousity is offline   Reply With Quote
Unread 06-08-2013, 02:06 AM   #3
animenerd93
Neko Neko Chi CHi
 
Join Date: Feb 2011
Posts: 2,826
u will need supports in them if u do glue. id use wire and foam or wire and clay
__________________
Cosplays~~~~~~
Anime and Kpop cosplaying is life~
KCON:
RapMonster- BTS N.O
fem!Ravi- VIXX Hyde
Hyuk- VIXX Voodoo Doll
animenerd93 is offline   Reply With Quote
Unread 06-08-2013, 01:07 PM   #4
Konaruhi
Registered User
 
Konaruhi's Avatar
 
Join Date: Feb 2010
Posts: 41
You could also use worbla. Worbla is pretty stable for things like these. With worbla, you can easily create 3-D designs like this. http://www.worbla.com
(Example: This headpiece was made only using worbla: http://blog.cosplaysupplies.com/wp-c...dressfinal.jpg) Someone already made a belt that is almost the same pattern as the one you showed by just using worbla: http://www.worbla.com/?p=358
If you never used worbla before, I recommend buying the sample size (the sample is only $18 in US, and $22 in Canada, price varies everywhere else though) so you can get a feel for it. Then buy the size that you think you could need. I've never worked with Wonderflex, worbla, or anything like that so I was skeptical about buying it, but you can learn how to use worbla really fast and it's extremely easy to use and mold to shapes. It's much easier than glue and clay, trust me I've tried them all.

As for attachment, well that depends on what you use. If you use glue and clay, you would definitely need supports. Then attach the supports to the shirt and shoe itself. But if you use worbla, it stands on its own. There's no need for supports, but redundancy can never hurt a cosplay, so you could use supports with worbla. With worbla, you can mold it straight to the shoe (depending on the shoe fabric) or make a buckle and attach it to the buckle. Same goes for the shoulder one, but I'd mold it to your shoulder first, then attach it to the shirt or make a buckle for it.

Good luck on your cosplay!
Konaruhi is offline   Reply With Quote
Unread 06-08-2013, 02:11 PM   #5
FadedxLight
Keyblade Wielder
 
FadedxLight's Avatar
 
Join Date: Dec 2012
Posts: 15
I will definitely try these ideas~

Thank you all so much!
FadedxLight is offline   Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is Off
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 07:58 AM.


Copyright 2002-2013 Cosplay.com, LLC. All Rights Reserved.
All comments and posts in our forums are the opinion of the respective poster.